Table 15-2: Mp-202 Telephone Adapter Hardware Specifications - AudioCodes MP-202 User Manual

Feature
Security
Telephony Signaling

Table 15-2: MP-202 Telephone Adapter Hardware Specifications

Power +12VDC
Interfaces RJ-45 - 10/100 Base-T for LAN
RJ-45 - 10/100 Base-T for WAN
2xRJ-11 - 2 FXS lines for telephones (POTS)
LED Indications LAN activity on Ethernet Port
Power on
Phone 1 and Phone 2 - Registered, In Use, Alert
Maximum Ringer Load (REN) - 5
SLIC
Short Haul
characteristics
Ringer Voltage - up to 65Vrms
Configurable Terminating Impedance
MP-202 Telephone Adapter
HTTPs for Web-based configuration
Password protected Web pages (MD5)
In-band:
DTMF: Detection and Generation, TIA464B
Caller ID: Telcordia, ETSI, NTT - Type I, Telcordia Type II
Call Progress Tones
Out-of-band:
FXS Loop-start
On/Off Hook, Flash Hook
Polarity reversal
206
Details
Document #: LTRT-50605
User's Manual