Figure 12-15: Edit Service Server Ports; Figure 12-16: Edit Service Opened Ports; Figure 12-17: Edit Service Opened Ports - AudioCodes MP-202 User Manual

MP-202 Telephone Adapter
4. Leave the Source Ports combo-box at its default 'Any'. In the drop-down list
'Destination Ports', select 'Single'; the screen refreshes again, providing an additional
field in which you should enter '2222' as the destination port.
5. Click 'OK' to save the settings.
6. In the screen 'Edit Service', click the link 'New Opened Ports'; the screen 'Edit Service
Opened Ports' opens (refer to the figure).
7. Similar to the trigger ports screen, select UDP as the protocol, leave the source port at
'Any', and enter a 3333 as the single destination port (refer to the figure).
Version 2.6

Figure 12-15: Edit Service Server Ports

Figure 12-16: Edit Service Opened Ports

Figure 12-17: Edit Service Opened Ports

147
12. Security
May 1