Figure 8-9: Qos - Edit Dscp Settings; Table 8-5: Edit Dscp Settings- Parameter Descriptions - AudioCodes MP-202 User Manual

MP-202 Telephone Adapter
2. To edit an existing entry, click its Edit action icon. To add a new entry, click the New
Entry link. In both cases, the 'Edit DSCP Settings' screen will appear (refer to the
figure).
3. Configure the following fields:
Parameter
DSCP Value (hex)
802.1p Priority
Click 'OK' to save the settings.
Note that the DSCP value overriding the priority of incoming packets with an unassigned
value (priority 0, assumed to be a no-priority-set) is '0x0' (refer to the figure). By default,
this value is mapped to 802.1p priority level '0 -Low', which means that such packets will
receive the lowest priority.
Version 2.6

Figure 8-9: QoS - Edit DSCP Settings

Table 8-5: Edit DSCP Settings- Parameter Descriptions

Description
Enter a hexadecimal number that will serve as the
DSCP value.
Select a 802.1p priority level from the combo box
(each priority level is mapped to low/medium/high
priority).
71
8. Quality of Service (QoS)
May 1