Figure 9-14: Point-To-Point Tunneling Protocol; Figure 9-15: Connection Summary - AudioCodes MP-202 User Manual

4. Select the radio button 'Point-To-Point Tunneling Protocol (PPTP) with User Name
and Password Authentication' and click Next; the screen 'Point-to-Point Tunneling
Protocol (PPTP)' opens (refer to the figure).
5. Enter the username and password provided by your Internet Service Provider (ISP).
6. Enter the PPTP server host name or IP address provided by your ISP.
7. Select whether to obtain an IP address automatically or specify one.
8. Click Next; the screen 'Connection Summary' opens (refer to the figure).
9. Check the 'Edit the Newly Created Connection' check box if you wish to be routed to
the new connection's configuration screen after clicking Finish.
10. Click Finish to save the settings; the new PPTP connection is added to the network
connections list and is configurable like any other connection.
MP-202 Telephone Adapter

Figure 9-14: Point-to-Point Tunneling Protocol

Figure 9-15: Connection Summary

88
User's Manual
Document #: LTRT-50605