Loading From A Computer In The Network; Figure 13-4: Load Configuration File - AudioCodes MP-202 User Manual

MP-202 Telephone Adapter
Note:
When creating a file for remote configuration update, it is recommended to enable the
'Display modified configuration fields only'. This ensures that the file includes only
parameters that were modified from their default value. You can choose either the conf
format or the flat ini-file format. In both cases, it is recommended to review the file and
ensure that only the parameters that the user has intended to modify appear. This file can
be placed on an FTP or HTTP server for mass configuration update, as described in
Remote Configuration Download.
Note:

13.3.1 Loading From a Computer in the Network

To load the MP-202's configuration file from a computer in the network:
1. Click the icon 'Configuration File' from the 'Advanced' screen; the 'Configuration File'
screen is displayed.
2. Click the button 'Load Configuration File'; the screen 'Load Configuration File' opens
(refer to the figure).
Version 2.6
Do not load this file to a different gateway, since it contains the MAC address,
which is specific to the gateway from where it was saved.
When rebooting, the gateway restores the settings from its configuration file.
However, if reboot attempts fail three times consecutively, the gateway resets
the configuration file by restoring factory defaults before attempting to reboot.

Figure 13-4: Load Configuration File

167
13. Advanced Settings
May 1