October 2001
IF you want to
modify the current
RLC settings,
(continued)
allow unrestricted
access to the
Meridian Digital
Telephone IP
Adapter unit and
the RLC,
Meridian Digital Telephone IP Adapter Installation and Administration Guide
Configuring the IP Adapter unit using the telephone menu
THEN do the following:
a. Press 1.
b. Press the Hold key.
Result: The telephone display prompts you to enter
the RLC port number that you want to process this
Meridian Digital Telephone IP Adapter unit's traffic.
The telephone display also shows the RLC port
number currently configured to handle this traffic,
similar to the following:
Enter Port # of RLC
7
c. Press the digit(s) of the new port number.
d. Press the Hold key.
Result: The telephone display prompts you to enter
the security level that you want to assign to this
Meridian Digital Telephone IP Adapter unit. The
telephone display also shows the current security
level, similar to the following:
Enter Security Level
1
a. Press 1 to select No security.
b. Press the Hold key.
c. Proceed to Enable IP? [1-Yes 2-No] on page 72.
71