Nortel Meridian Installation And Administration Manual page 91

October 2001
12 The telephone display asks if you want to modify the IP parameters, similar
to the following:
Modify IP Parameters?
[1-Yes 2-No]
IF you want to
retain the current
IP parameters
configured for this
Meridian Digital
Telephone IP
Adapter unit,
modify the IP
parameters
configured for this
Meridian Digital
Telephone IP
Adapter unit,
allow a DHCP
server to
dynamically
assign an IP
address to this
Meridian Digital
Telephone IP
Adapter unit each
time someone logs
on with this unit,
Meridian Digital Telephone IP Adapter Installation and Administration Guide
Configuring the IP Adapter unit using the telephone menu
THEN do the following:
a. Press 2.
b. Press the Hold key.
c. Proceed to step 13 on page 70.
a. Press 1.
b. Press the Hold key.
Result: The telephone display asks if you want to
enable Dynamic Host Configuration Protocol
(DHCP), similar to the following:
Enable DHCP?
[1-Yes 2-No]
a. Press 1.
b. Press the Hold key.
c. Proceed to Enable DiffServ? [1-Yes 2-No] on page
69.
Note: Refer to the Reach Line Card Installation and
Administration Guide (NTP 555-8421-210) for more
information on DiffServ Codepoint and 802.1p
mapping.
67