Nortel Meridian Installation And Administration Manual page 88

Configuring the IP Adapter unit using the telephone menu
9 The telephone display asks if you want to modify the SPRE code that you
must dial to go offline manually, similar to the following:
Modify Offline SPRE?
[1-Yes 2-No]
IF you want to
modify the
number that you
must dial to go
offline with the
Meridian Digital
Telephone IP
Adapter unit in the
absence of an
offline command
in the Online/
Offline Table,
retain the current
offline SPRE
code,
64
THEN do the following:
a. Press 1.
b. Press the Hold key.
Result: The telephone display prompts you for a
new offline SPRE code. The telephone display also
shows the current offline SPRE code, similar to the
following:
Enter Offline SPRE
#98
c. Press the digits of the new offline SPRE code.
Note: Refer to the Note on page 63 for information
on pound signs (#) in SPRE codes.
d. Press the Hold key.
e. Proceed to step 10 on page 65.
a. Press 2.
b. Press the Hold key.
Meridian Digital Telephone IP Adapter Installation and Administration Guide
Standard 1.1