Nortel Meridian Installation And Administration Manual page 82

Configuring the IP Adapter unit using the telephone menu
IF you want to
display read-only
IP parameters,
not display IP
parameters,
58
THEN do the following:
a. Press 1.
b. Press the Hold key.
Result: The telephone display shows the remote
site's current IP address, similar to the following:
IP Address
192.168.142.102
c. Press the Hold key.
Result: The telephone display shows the remote
site's current IP subnet mask, similar to the
following:
IP Subnet Mask
255.255.255.0
d. Press the Hold key.
Result: The telephone display shows the remote
site's current IP gateway, similar to the following:
IP Gateway
192.168.142.254
e. Press the Hold key.
f. Proceed to step 4 on page 59.
a. Press 2.
b. Press the Hold key.
Meridian Digital Telephone IP Adapter Installation and Administration Guide
Standard 1.1