Software Problems; Symptom Descriptions; Display Logs Definitions - Nortel Meridian Installation And Administration Manual

Troubleshooting

Software problems

This section identifies some problems that can occur with the Configuration
Manager software, and describes what to do to resolve them.

Symptom descriptions

If you are not able to complete a task with the Configuration Manager, perform
troubleshooting as described in the following table.
Symptom
10060 TELNET CONNECTION
FAILED
attempting to connect to the
Meridian Digital Telephone IP
Adapter unit.
The Meridian Digital
Telephone IP Adapter unit
does not send or receive
Ethernet traffic.

Display Logs definitions

You can locate Display Logs definitions in Configuration Manager Help.
162
appears when
Meridian Digital Telephone IP Adapter Installation and Administration Guide
What to do
It is possible that communication has been
lost between the administration PC and the
Meridian Digital Telephone IP Adapter unit.
Close the Configuration Manager, then
restart it.
It is possible that communication has been
lost between the administration PC and the
node you were logged on to.
Close the Configuration Manager, then
restart it.
Standard 1.1