Configuring the IP Adapter unit using the telephone menu
IF you want to
not enable
prioritizing of
voice packets in
the IP header,
enable prioritizing
of voice packets in
the IEEE Media
Access Control
layer (802.1p),
not enable
prioritizing of
voice packets in
the IEEE Media
Access Control
layer,
13
The telephone display asks if you want to modify RLC Parameters, similar
to the following:
Modify RLC Parameters?
[1-Yes 2-No]
IF you want to
retain the current
RLC settings,
70
THEN do the following:
a. Press 2.
b. Press the Hold key.
Result: The telephone display asks if you want to
enable 802.1p mapping, similar to the following:
Enable 802.1p Mapping?
[1-Yes 2-No]
a. Press 1.
b. Press the Hold key.
c. Proceed to step 13, below.
a. Press 2.
b. Press the Hold key.
THEN do the following:
a. Press 2.
b. Press the Hold key.
c. Proceed to step 18 on page 76.
Meridian Digital Telephone IP Adapter Installation and Administration Guide
Standard 1.1