Nortel Meridian Installation And Administration Manual page 92

Configuring the IP Adapter unit using the telephone menu
IF you want to
manually enter
static IP
information for
this Meridian
Digital Telephone
IP Adapter unit,
Note: Assigning static IP addressing to a Meridian Digital Telephone IP
Adapter unit allows you to use the address information to identify the unit
on the IP network. This makes the unit more accessible for online
administration and maintenance.
68
THEN do the following:
a. Press 2.
b. Press the Hold key.
Result: The telephone display prompts you for the
Meridian Digital Telephone IP Adapter unit's new,
permanent IP address. The telephone display also
shows the current setting, similar to the following:
Enter IP Address
0.0.0.0
c. Press the digits of the Meridian Digital Telephone IP
Adapter
for the IP address delimiter. (Refer to the table on
page 55.)
d. Press the Hold key.
Result: The telephone display prompts you for the
Meridian Digital Telephone IP Adapter unit's new,
permanent IP subnet mask. The telephone display
also shows the current setting, similar to the
following:
Enter IP Subnet Mask
255.0.0.0
e. Press the digits of the Meridian Digital Telephone IP
Adapter
f. Press the Hold key.
Result: The telephone display asks if you want to
modify the Meridian Digital Telephone IP Adapter
unit's IP gateway, similar to the following:
Modify IP Gateway?
[1-Yes 2-No]
Meridian Digital Telephone IP Adapter Installation and Administration Guide
's permanent IP address. Use the * key
unit
's permanent IP subnet mask.
unit
Standard 1.1