Configuring Ip Information - Nortel Meridian Installation And Administration Manual

October 2001

Configuring IP information

To change the IP information, complete the following procedure:
1 Complete the fields of the IP Configuration property sheet as described in
"IP Configuration field descriptions", on page 90.
2 Click on the OK button to save the information in the temporary work file.
3 Click on the Send button to update the Meridian Digital Telephone IP
Adapter unit with the new information.
IF you are
logged on to the
Meridian Digital
Telephone IP Adapter
unit,
not logged on to the
Meridian Digital
Telephone IP Adapter
unit,
4 Restart the Meridian Digital Telephone IP Adapter unit.
Note: To restart a Meridian Digital Telephone IP Adapter unit, use the
procedure found under "Restarting the system", on page 147.
Meridian Digital Telephone IP Adapter Installation and Administration Guide
Changing configuration settings using Configuration Manager
THEN
the changes are written into the Meridian
Digital Telephone IP Adapter unit's buffer.
To save the changes in flash memory, choose
Upload/Download › Save to Flash from the
Menu Bar.
the Configuration Manager dialog box displays,
similar to the following:
Do one of the following:
a. Log on to the Meridian Digital Telephone
IP Adapter unit, then click on the Send
button again.
b. Save the changes to a file on your
administration PC.
89