Rlc Connection Configuration Field Descriptions - Nortel Meridian Installation And Administration Manual

October 2001

RLC Connection configuration field descriptions

Field
Unit ID
RLC Port Number
IP Connection
IP Connection: IP Address
IP Connection: IP
Signaling
PSTN Connection
PSTN Connection: PSTN
Number to Connect to
RLC
Meridian Digital Telephone IP Adapter Installation and Administration Guide
Changing configuration settings using Configuration Manager
Description
The RLC's non-configurable unit ID of 254.
Enter the RLC voice port number designated for the
Meridian Digital Telephone IP Adapter unit on the RLC
Remote connection configuration property sheet.
Click on the Enable option button, if you want to route
calls over your IP network.
Click on the Disable option button, if you do not want to
route calls over your IP network.
Enter the RLC's IP address. The Meridian Digital
Telephone IP Adapter unit uses this IP address to connect
to the RLC over the IP network.
Click on the Permanent option button to configure this
port's IP connection to be up at all times.
Click on the On Demand option button to configure this
port's IP connection to be up only when needed.
Refer to "Deployment", on page 36 for help in determining
which setting to configure.
This setting does not apply to Meridian Digital Telephone
IP Adapters.
This setting does not apply to Meridian Digital Telephone
IP Adapters.
93