Bandwidth Limit - Nortel Meridian Installation And Administration Manual

Using the digital telephone
Message
Online Mode
Port Already in Use
Port Not Logged In
Release and Try Again

Bandwidth Limit

DSP Limit
102
Description
This means you can place and receive calls through the
host PBX.
If this message appears on your station, your station
participates in a multi-user or dynamic pool port on the
RLC.
This message appears if the port that you are attempting to
log on to is already being used by someone else.
If this message appears on your station, your station
participates in a multi-user or dynamic pool port on the
RLC. Your station is logged off.
There are not enough DSP resources to process the call.
Try again at a later time.
Note: Ensure to initiate calls from the appropriate calling
key according to the following parameters:
Use the host calling key to call someone at the host
!
PBX site.
There is not enough bandwidth to complete the requested
action.
There were not enough DSP resources to complete the
requested action.
Meridian Digital Telephone IP Adapter Installation and Administration Guide
Standard 1.1