Configuring Ip Information - Nortel Digital Telephone IP Adapter Installation And Administration Manual

June 2005

Configuring IP information

To change the IP information:
1 Complete the fields of the IP Configuration property sheet as described in
"IP Configuration field descriptions" on page 101.
2 Click on the OK button to save the information in the temporary work file.
3 Click on the Send button to update the Digital Telephone IP Adapter unit
with the new information.
IF you are
logged on to the
Digital Telephone IP
Adapter unit,
not logged on to the
Digital Telephone IP
Adapter unit,
Digital Telephone IP Adapter Installation and Administration Guide
Changing configuration settings using Configuration Manager
THEN
the changes are written into the Digital
Telephone IP Adapter unit's buffer.
To save the changes in Flash memory, choose
Upload/Download
Menu Bar.
Note: When you change System or IP
Configuration parameters and Save to Flash,
calls can be dropped. Ensure that there are no
active calls when you make changes to these
configuration parameters.
the Configuration Manager dialog box displays,
similar to the following:
Do one of the following:
a. Log on to the Digital Telephone IP
Adapter unit, then click on the Send
button again.
b. Save the changes to a file on your
administration PC.
→
Save to Flash from the
99