Delete Token; Token Status; Rf Radio Keyfobs; Add Keyfob - Bosch Solution 16i User Manual

Access > Token >

Delete Token

This menu allows a master user to delete a users proximity
token or card. Only users who belong to the same area(s)
as the master user can be deleted.
1. Enter [Master PIN] + [MENU]
2. Enter [1] + [2] + [1] + [OK].
The keypad will display the Ur = prompt.
Enter the user number who's token you want to
delete, then press [OK].
3. If you have selected a valid user with a token, the
system will ask you to confirm the deletion.
4. Press [OK] again to delete the token, or press
[MENU] to cancel.
Access > Token >

Token Status

This menu allows a master user to identify a token which
has been programmed into the system. Only tokens that
have been assigned to the same area(s) as the Master user
can be identified.
1. Enter [Master PIN] + [MENU]
2. Enter [1] + [2] + [2] + [OK].
The system will prompt you to present the token to
to be identify to the keypad.
3. Once the token is presented the system will display
the user number who the token belongs to. In the
example below the token belongs to user 9.
4. Press [OK] when finished
Bosch Security Systems 10/07 BLCC500U FTR1.01
deLPro
MENU 1-2-1
Ur=
Del ?
ID Pro
MENU 1-2-2
PrSEnt
Ur009

RF Radio Keyfobs

Radio Keyfobs can be used as an alternate method for users
to turn an area(s) on and off and or control an automatic
door or gate.
This section outlines how to add and delete RF keyfobs
for users. The RF Keyfob must be compatible with the RF
Receiver that has been installed by your security company.
Access > RF Keyfob >

Add Keyfob

This menu allows a master user to program or learn the
user's keyfob ID number into the system.
1. Enter [Master PIN] + [MENU]
2. Enter [1] + [3] + [0] + [OK].
The keypad will display the Ur = prompt.
Enter the user number you want to add the keyfob
for, then press [OK].
3. The keypad will prompt you to enter the RF keyfob
ID number.
3. Enter the RF Keyfob's ID Number or alternatively
press any button on the keyfob to automatically
learn the ID number.
Access > RF Keyfob >

Delete Keyfob

This menu allows a master user to delete the RF keyfob that
has been assigned to a user.
1. Enter [Master PIN] + [MENU]
2. Enter [1] + [3] + [1] + [OK].
The keypad will display the Ur = prompt.
Enter the user number who's keyfob you want to
delete, then press [OK].
3. When prompted enter the RF keyfob ID number.
4. Enter the RF Keyfob's ID Number or alternatively
press any button on the keyfob to automatically
delete the ID number.
Solution16 User Guide
i
AddFob
MENU 1-3-0
Ur=
Ent Id
dELFob
MENU 1-3-1
Ur=
Ent Id
13