Delete Pin; Tokens; Add Token; Delete Token - Bosch Solution 144 User Manual

Solution 144 User Guide
Access > PIN Codes >

Delete PIN

This menu allows a Master user the ability delete other
users PIN's. A Master user can only delete a PIN for those
users that have been assigned to the same area(s) as the
Master user. A Master user cannot delete their own PIN.
Enter programming mode (PIN + MENU) then,
1. Make sure that the system is turned off.
2. Press [MENU] + [1] + [1] + [3].
The keypad will list all users that you can delete.
Ur1 John Smith
Ur2 Debbie Smith
Ur3 User 3 Name
Press

3. Use the [] and [] keys to highlight the user whose
PIN you want to delete, then press [OK] to select.
Alternatively, you can enter the user number you
want to delete, then press [OK].
Press OK to delete PIN
For Ur2
Debbie Smith
Press OK or MENU
4. Press [OK] again to delete the PIN, or press [MENU]
to cancel.

Tokens

This section outlines how to add and delete token cards
that allow an alternate method for users to turn the system
on and off via a prox reader enabled Keypads. The system
can also be configured to automaticall open a door if it has
been fitted with an electric door lock. You should discuss
this feature with your installer for more details on your
particular installation.
A token is a small plastic tag card that has a unique ID. A
user can place the token card in front of a keypad that has
a built-in token reader to turn the system or specific areas
on and off.
Access > Token >

Add Token

This menu allows a Master user the ability to add a new
token for for those users that have been assigned to the
same area(s) as the Master user.
Enter programming mode (PIN + MENU) then,
1. Enter [MENU] + [1] + [2] + [0].
A list of users will display on the keypad.
2. Use the [] and [] keys to select the user that you
want to add a token for, then press [OK] to select.
12
MENU 1-1-3
OK or MENU
MENU 1-2-0
Ur1 John Smith
Ur2 Debbie Smith
Ur3 User 3 Name
Press

3. If you are using a keypad with built in reader the
system will prompt you to present the token to the
keypad. Once the token is presented the keypad we
beep and return to the menu.
To add token for Ur1
JOHN SMITH present new
token
Press OK or MENU
A Master user can only delete a token for those users that
have been assigned to the same area(s) as the Master user.
Access > Token >

Delete Token

This menu allows a Master user the ability to delete a token
for those users that have been assigned to the same
area(s) as the Master user.
Enter programming mode (PIN + MENU) then,
1. Enter [MENU] + [1] + [2] + [1].
A list of users will display on the keypad.
Ur1 John Smith
Ur2 Debbie Smith
Ur3 User 3 Name
Press

2. Use the [] and [] keys to select the user who's
token you want to delete, then press [OK] to select.
To delete token for Ur1
John Smith Press OK
009553507
Press OK or MENU
3. When prompted press the [OK] key to confirm token
deletion.
Access > Token >

Token Status

This menu allows a Master user the ability to identify a
token which has been programmed into the system. Only
tokens that have been assigned to the same area(s) as the
Master user cn be identified.
Enter programming mode (PIN + MENU) then,
1. Enter [MENU] + [1] + [2] + [2].
The system will prompt you to present the token to
the keypad.
Bosch Security Systems 04/12 BLCC600U
OK or MENU
MENU 1-2-1
OK or MENU
MENU 1-2-2