4.
Press [OK] to exit
System > System Testing >
Battery Test
This menu allows you to manually test the systems back up
battery. The panel will automatically test the battery once
per day and every time the system is armed.
The battery test can take up to two minutes to complete
and the keypad will display the voltage of the battery
during the test.
1.
Enter [Master PIN] + [MENU]
2.
Enter [7] + [9] + [2] +[OK]. The keypad will display
the battery voltage whilst under test.
testing
If the test passes the keypad will display:
If the test fails the keypad will display. If this
happens you should contact your installer.
3.
Press [OK] to exit.
Bosch Security Systems 10/07 BLCC500U FTR1.01
PASS
tst-bA
MENU 7-9-1
PAss
FAil
Solution16
User Guide
i
31