Reporting Alarms; About The Keypad; Keypad Keys - Bosch Solution 16i User Manual

Solution16 User Guide
i
All On
When you turn an area All On, you are turning on all non 24-
hour zones, both interior (motion detectors) and perimeter
(doors and windows of the building).
Part On
When you turn an area Part On, you only turn on some of
the non 24-hour zones. Your security company will program
which zones are included in this portion. Part zones may
include only the perimeter (doors and windows) or your
system, or sensors in other areas of your premises. Check
with your installation company to learn which zones are
Part zones.
Re po r ti ng Alarms
Your system may be programmed to send reports to
a alarm monitoring centre. These centres are maned
24hrs a day and can take action on your behalf when
an alarm occurs. Once the alarm report is complete,
the system returns the telephone to normal operation.
Your security company will advise you how your system
has been configured for alarm reporting.
Your system will make repeated attempts to send reports
to the monitoring centre. If your system fails to report, the
keypad will display the 'service' symbol.
Ab ou t the Key pad
Your keypad has 20 keys or buttons. The buttons allow
you to input instructions and perform programming as
required. Some buttons have a secondary function which
is activated by holding them down for two seconds.
Each button's function is described below:

Keypad Keys

Key
The numeric keys allow you to enter
to
you numbers when required
Use the [MENU] and the numeric keys
to enter commands. The [MENU] key
is also used to go back one level when
navigating through menus or to exit a
programming location without saving
changes.
The [ON] key allows you to turn an area
or output on. To turn all areas on at the
same time when the system has been
partitioned, press and hold the [ON]
key for two seconds.
The [PART] key allows you to turn an
area Part On. This key can also be used
to bypass a zone or multiple zones
when you press and hold for two
seconds.
6
Description
Key
The [OFF] key allows you to turn an area
or output off. To turn all areas off at the
same time when the system has been
partitioned, enter PIN and press and
hold the [OFF] key for two seconds.
The [OK] key allows you to select
options and confirm programming
changes.
The [MAIL] key is used to initiate a
dialer test when you press and hold for
two seconds.
The [] key allows you to move the
cursor left when programming text or
telephone numbers.
The [] key allows you to move the
cursor right when programming text
or telephone numbers.
The [↑] key allows you to navigate
through menus or to toggle characters
when
numbers.
The [] key allows you to navigate
through menus or to toggle characters
when
numbers.
display current trouble conditions
when the area that the keypad is
displaying is disarmed.
Pressing the [] and [↑] keys together
and holding them down for 2 seconds
+
will cause trigger a Panic alarm. If
for 2 sec
programmed the sirens will sound and
the monitoring station will be notified.
Pressing the [] and [] keys together
and holding them down for 2 seconds
+
will trigger a Fire alarm. If programmed
for 2 sec
the sirens will sound and the monitoring
station will be notified.
Pressing the [↑] and [] keys together
and holding them down for 2 seconds
+
will trigger a Medical alarm. If
for 2 sec
programmed the sirens will sound and
the monitoring station will be notified.
Table 2: Keypad Keys and Their Function
K E YPAD E M E R G E NC Y AL AR M TR I G G E R 'S
Key Sequence
Ë Ê
+ Hold for 2 seconds
Ê È
+ Hold for 2 seconds
È Â
+ Hold for 2 seconds
Table 3: Keypad Emergency Alarm Trigger's
Description
programming telephone
programming telephone
Pressing The [] key will
Event Triggered
Keypad Fire Alarm
Keypad Panic Alarm
Keypad Medical Alarm
Bosch Security Systems 10/07 BLCC500U FTR1.01