Copyright Notice; Trademarks; Notice Of Liability; Notice To Owner - Bosch Solution 16i User Manual

Solution16 User Guide
i

Copyright Notice

Unless otherwise indicated, this publication is the
copyright of Bosch Security Systems Pty Ltd ("Bosch"). All
rights are reserved.You may download a single copy of this
publication. By downloading the publication you agree that
you will: (i) only use the publication for your own reference;
(ii) not commercially exploit or charge any person for the
use of the publication; and (iii) not modify the publication
in any way without the prior written permission of Bosch.
Except as specified above or where authorised by the
Copyright Act 1968 (Cth), no part of this publication may
be reproduced, transmitted, modified or stored in any form
or by any means, without the prior written permission of
Bosch.

Trademarks

Throughout this document trademark names may have
been used. Rather than put a trademark symbol in every
occurrence of a trademark name, we state that we are using
the names only in an editorial fashion and to the benefit of
the trademark owner with no intention of infringement of
the trademark.

Notice of Liability

While every effort has been taken the accuracy of this
document, neither Bosch Security Systems Pty Ltd nor any
of its official representatives shall have any liability to any
person or entity with respect to any liability, loss or damage
caused or alleged to be caused directly or indirectly by the
information contained in this book. Should you find any
error on inconsistency, please notify us accordingly.
Bosch Security Systems Pty Ltd reserves the right to make
changes to features and specifications at any time without
prior notification in the interest of ongoing product
development and improvement.
Thankyou for selecting the Solution 16i Security Control Panel for your security needs. Your system includes many
advanced features and functions which will be programmed and configured by your security consultant during installation.
Depending on the configuration, and your access level, you may have the ability to program certain features within the
system to suit changes in your security needs. For example you may wish to change a User Name or PIN number when a
staff member leaves.
This manual explains all aspects of system operation as well as detailling the various programming options available to
you. We ask that you take the time to read this manual carefully and that you have your installer explain the basic system
operation and configuration to you when the installation is complete.
2

Telepermit Note

The grant of a Telepermit for a device in no way indicates
Telecom acceptance of responsibility for the correct
operation of that device under all operating conditions.
This equipment shall not be used in any manner that could
constitute a nuisance to other Telecom customers.
Immediately disconnect this equipment should it become
physically damaged, and arrange for its disposal or repair.
The transmit level from this device is set as a fixed level
and because of this there may be circumstances where the
performance is less than optimal. Before reporting such
occurrences as faults, please check the line with a standard
telepermitted telephone.
Warnings
1) This product must be installed by a qualified and
licensed security installer.
2) This product may not perform as expected if
installed incorrectly.
3) Some features of this product require a working
telephone line to operate and telephone
communication service provider charges may be
applicable.
4) Australian standard AS 2201 require regular service
by qualified and licensed security persons and
regular user testing. Please consult your security
alarm company for further details.
5) Incorrect programming of options can result in
operation contrary to what may be desired.
6) Leave the mains adapter plugged in at all times.
7) Leave the telephone line plugged in at all times
under normal conditions.

Notice to Owner

Bosch Security Systems 10/07 BLCC500U FTR1.01