Delete Token; Token Status; Rf Radio Keyfobs; Add Keyfob - Bosch Solution 16i User Manual

Access > Token >

Delete Token

This menu allows a master user to delete a users proximity
token or card. Master users can only delete user's tokens
that belong to the same area.
1. Enter your Master PIN + [MENU].
2. Enter [1] + [2] + [1] + [OK].
The keypad will display the Ur = prompt.
3. Enter the user number who's token you want to
delete, then press [OK].
If you have selected a valid user with a token, the
system will ask you to confirm the deletion.
4. Press [OK] again to delete the token, or press [MENU]
to cancel.
Access > Token >

Token Status

This menu allows a master user to identify which user
belongs to the token.
1. Enter your Master PIN + [MENU].
2. Enter [1] + [2] + [2] + [OK].
The system will prompt you to present the token to be
identify to the keypad.
3. Present the token to the keypad.
Once the token is presented the system will display the
user number who the token belongs to. In the example
below the token belongs to user 9.
4. Press [OK] when finished.
Bosch Security Systems 6/09 BLCC500U FTR1.03
deLPrO
MENU 1-2-1
Ur=
Del ?
iD PrO
MENU 1-2-2
PrSEnt
Ur009

RF Radio Keyfobs

Radio Keyfobs can be used as an alternate method for users
to turn an area(s) on and off and or control an automatic
door or gate.
This section outlines how to add and delete RF keyfobs
for users. The RF Keyfob must be compatible with the RF
Receiver that has been installed by your security company.
Access > RF Keyfob >

Add Keyfob

This menu allows a master user to program or learn a
keyfob ID number into the system.
1. Enter your Master PIN + [MENU].
2. Enter [1] + [3] + [0] + [OK].
The keypad will display the Ur = prompt.
3. Enter the user number you want to add the keyfob
to, then press [OK].
The keypad will prompt you to enter the RF keyfob ID
number.
4. Enter the RF Keyfob's ID Number or alternatively
press any button on the keyfob to automatically
learn the ID number.
Access > RF Keyfob >

Delete Keyfob

This menu allows a master user to delete the RF keyfob that
has been assigned to a user.
1. Enter your Master PIN + [MENU].
2. Enter [1] + [3] + [1] + [OK].
The keypad will display the Ur = prompt.
3. Enter the user number who's keyfob you want to
delete, then press [OK].
4. Press [OK] to delete the RF keyfob and exit.
Solution 16 User Guide
i
AddFOb
MENU 1-3-0
Ur=
Ent id
dELFOb
MENU 1-3-1
Ur=
dEL?
13