Delete Pin; Proximity Tokens & Cards; Add Token - Bosch Solution 16i User Manual

Solution16 User Guide
i
The keypad will display the Ur = prompt. Enter the
user number you want to add, then press [OK].
If you select a user number which already exists,
an error beep will sound. If this happens select a
different user number.
3. Enter the new PIN for the user you have selected.
If an error tone sounds, try a different PIN.
The display will show ==== as you enter the new
PIN.
4. Press [OK] to save and exit, or press [MENU] to exit
without saving.
Access > PIN Codes >

Delete PIN

This menu allows a master user the ability delete other
users PIN's. A Master user can only delete a PIN for users
that have been assigned to the same area(s) as the Master
user. A Master user cannot delete their own PIN.
1. Enter [Master PIN] + [MENU]
2. Enter [1] + [1] + [3] + [OK].
The keypad will display the Ur = prompt. Enter the
user number you want to delete, then press [OK].
3. If you have selected a valid user, the system will ask
you to confirm the deletion.
4. Press [OK] to delete the PIN, or press [MENU] to
cancel.
12
Ur=
EntPin
DELPin
MENU 1-1-3
Ur=
Del ?
Proximity Tokens & Cards
Proximity tokens and cards can be used as an alternative to
a PIN number when arming and disarming the system. A
token is a small plastic tag card that has a unique ID. A user
can place the token card in front of a reader keypad to turn
the system or specific areas on and off.
This feature requires that at least one prox reader enabled
keypad is fitted. This section outlines how to add and delete
proximity tokens or cards. If you try to add a token from a
keypad that does not have built in reader the system will
prompt you to select the reader you which to learn from.
You should discuss this feature with your installer for more
details on your particular installation.
Access > Token >

Add Token

This menu allows a master user to add a new token for
other users provided they are assigned to the same area(s)
as the Master user.
1. Enter [Master PIN] + [MENU]
2. Enter [1] + [2] + [0] + [OK].
The keypad will display the Ur = prompt.
Enter the user number you want to add the token
for, then press [OK].
3. If you are currently using a keypad with built in
reader the system will prompt you to present
the new token to the keypad. Once the token is
presented the keypad will beep and return to the
menu.
4. Your system must have at least one reader enabled
keypad for any token functions to work.
AddPro
MENU 1-2-0
Ur=
PrSEnt
Bosch Security Systems 10/07 BLCC500U FTR1.01