Setup Menu Level 0 Screens - Powerware BPIV Installation & Operation Manual

9.3.5

Setup Menu Level 0 Screens

Select SETUP from the Main menu to display the System Setup Level 0 Screen.
This screen can be used to set the screen contrast, show the firmware versions
installed, identify the unit type, and enter a password to access Level 1 functions
(refer to paragraph 9.3.6). No password is necessary to access Level 0 functions.
Figure 9---15 shows the System Setup Level 0 menu screen.
Use the or
the function using the SELECT pushbutton.
Select CONTRAST from the System Setup Level 0 menu to display the Contrast
Adjust screen. Figure 9---16 shows the Contrast Adjust screen.
Use the or
to the System Setup menu screen, select the
Powerware BPIV (10 kVA- -30 kVA) Installation and Operation
164201406 Rev. C 013004
pushbuttons to highlight the setup function desired, then choose
SYSTEM SETUP --- LEVEL 0
ENTER PASSWORD
LOG OUT
CONTRAST
VERSIONS
UNIT TYPE
Figure 9 ---15. Setup Menu Level 0 Screen
pushbuttons to adjust the contrast for the LCD screen. To return
CONTRAST ADJUST
Figure 9 ---16. Contrast Adjust Menu Screen
SELECT
pushbutton.
70%
9--11