Table of Contents
Advertisement
9.6.8
Time Setup Screen
Select Time from the Setup menu to display the Time Setup screen. The Time
Setup screen allows you to set the internal time stamp of the UPS. The time stamp
is used for logging events in the Event History Log. Figure 9---10 shows the Time
Setup screen.
UPS System Normal
ALARM:
NONE
NOTICES: NONE
Battery
Minutes
48.5
Setup
Port 1
Port 2
Time
Language
Meters
The small return arrow (
screen. This arrow is a reminder that you can press the
Monitor Panel to toggle the pushbuttons between the menu box and the
information area. When the scroll bar is in the information area, the return arrow is
in the menu box. When the scroll bar is in the menu box, the return arrow is in the
information area.
When the scroll bar appears in the information area, you can use the pushbuttons
to change the time stamp settings. To change a setting in the time stamp, press
the
and
the setting (make it a higher value), press the
setting (make it a lower value), press the
settings upon exit from this screen, be sure the SAVE field is set to YES.
9--12
Uninterruptible Power System
Events
Statistics Graphics
Figure 9---10. Time Setup Screen
) appears in the upper right corner of the Time Setup
pushbuttons to highlight the setting you want to change. To increase
Set Time & Date
DAY DT
MON
YR
HR:MN
MON 07
APR
97
15:06
Setup
pushbutton. To decrease the
pushbutton. If you want to save the
Powerware 9315 Parallel Capacity/Redundant System with PHP SSBM
15 JUL 1998
09:25:42
SAVE
YES
pushbutton on the
164201373 Rev. A
092402
Advertisement
Table of Contents
