Basic Operations
To make copies onto postcards
1
Position the document(s) to be copied. (Refer to page 5-1 for more de-
tails.)
2
Select the desired color mode. (Refer to page 3-20 for more details.)
3
Open the manual bypass tray.
4
Adjust the paper guides to the size
of the paper, and then load the pa-
per so that the front side of the pa-
per faces down. Lightly slide the
paper into the feed slot as much as
possible so that it is ready to be fed
into the copier.
H
Load postcards widthwise into
the manual bypass tray with the
surface to be copied onto facing
down.
5
Make sure that the screen allowing
you to select the manual bypass
tray paper size is displayed, and
then touch [4 × 6].
The "Paper Type" setting automati-
cally changes to "Thick Paper 2".
(* Setting the paper size for the
manual bypass tray to "4 × 6" auto-
matically changes the "Paper Type"
setting to "Thick Paper 2".)
CF1501/CF2001
6
6-11