Minolta CF1501 Operator's Manual page 104

6
4
Adjust the paper guides to the size
of the paper, and then load the pa-
per so that the front side of the pa-
per faces down. Lightly slide the
paper into the feed slot as much as
possible so that it is ready to be fed
into the copier.
? Are the recommended overhead
projector transparencies (MI-
NOLTA CF300 (D)) being used?
§ When using the recommended
overhead projector transparencies (MINOLTA CF300 (D)), load
them as described on page 4-17.
5
Make sure that the screen that al-
lows you to select the manual by-
pass tray paper size is displayed,
check that the desired paper size is
selected, and then touch [Paper
Type].
6
Touch [OHP Film], and then touch
[Enter].
7
Specify any other necessary settings.
H Zoom (Refer to page 6-14 for more details.)
H Original Image Type (Refer to page 6-18 for more details.)
H
Density (Refer to page 6-20 for more details.)
8
Press the [Start] key.
6-10
Basic Operations
CF1501/CF2001