Minolta CF1501 Operator's Manual page 208

9
H
Fold the printed page in half, and
then check that the test patterns
are aligned. Check that the widths
of both margins are the same.
H If the margin widths of the test
patterns are not the same, touch
then touch [Enter].
Setting a higher positive number
makes the margin wider; setting a
higher negative number makes
the margin narrower.
H
Repeat step 3 until the widths of
both margins are the same.
What is the standard setting?
?
§ Before adjusting the third or fourth
paper drawer, enter the same ad-
justment value for the first or sec-
ond paper drawer and check the
test pattern.
4
In the Expert User's Mode screen, touch [Exit].
5
In the Administrator Mode screen, touch [Exit].
6
In the Utility screen, touch [Exit].
9-32
and to adjust it, and
Administrator Mode Operations
c
c: 3.0 mm ± 1.0 mm
CF1501/CF2001