Sorting/Grouping - Minolta CF1501 Operator's Manual

7

Sorting/Grouping

Note
How pages are fed depends on whether the following options are in-
stalled and on whether the pages are being copied or printed.
- 10-Mailbin sorter (JS-1002) and a printer controller
- Finisher (FN-107 or FN-108) and a printer controller
Setting
Non-Sort
Sort
7-10
Options Installed
10-Mailbin Sorter (JS-
1002)
Finisher (FN-107 or FN-
108) and a printer con-
troller
10-Mailbin Sorter (JS-
1002)
Finisher (FN-107 or FN-
108) and a printer con-
troller
None
Advanced Operations
Operation
For a copy job or for a print job* where a
mailbin is not specified, the output is fed into
mailbin 1. When the bin reaches its maxi-
mum capacity, the output is fed into the next
mailbin.
For a print job where a mailbin is specified,
the output is fed into the specified mailbin.
For a copy job, the output is fed into the up-
per paper output tray.
For a print job*, the output is fed into the
lower paper output tray. While printing,
printouts of paper sizes and types not com-
patible with the lower paper output tray are
fed into the upper paper output tray. For
more details, refer to page 12-6 and
page 12-7 of "12 Appendix".
For a copy job, the output is fed into mailbin
1.
The number of mailbins that can be used to
receive the output can be set between a
maximum of 10 and a minimum of 2, ac-
cording to the "Mail Bin Assignment" param-
eter setting. For more details, refer to the
section "To set the "To set the "Mail Bin As-
signment" parameter" on page 8-14.
For a print job* where a mailbin is not spec-
ified, the output is sorted and fed into mail-
bin 1.
For a print job* where a mailbin is specified,
the output is sorted and fed into the speci-
fied mailbin.
For a print job*, the printed sets of pages are
sorted and fed out into the lower paper out-
put tray shifted to opposite sides so that
they are separated from each other.
For a print job*, the printouts are sorted and
fed out into the normal copy output tray.
CF1501/CF2001