Minolta CF1501 Operator's Manual page 49

Before Making Copies
No. Part Name
6 Start key
7 Stop key
8 C (clear) key
9 Panel Reset key
10 Interrupt key
11 Energy Saver key
12 Access key
13 Copy key
14 Scan key
15 Keypad
CF1501/CF2001
Description
• Press to start the copy operation.
• If this key is pressed while the copier is warming up, the
copy job is delayed until the copier is finished warming
up. See p. 3-26.
• The [Start] key indicator lights up in green to indicate that
the copier can begin copying. The [Start] key indicator
lights up in orange to indicate that the copier cannot
make copies.
• Press to stop a continuous copy operation.
• Press to reset the number of copies to "1".
• Press to erase a setting, such as the zoom ratio or size,
selected using the keypad.
• Press to reset all copy functions and settings to their de-
faults. (All selected settings are cancelled.)
See p. 3-25.
* Stored zoom ratios, stored job settings, and interrupted or
delayed copy jobs are not cancelled.
• Press to interrupt a copy job. (The [Interrupt] key indica-
tor lights up in green to indicate that the copier is in In-
terrupt mode.)
• Press again to cancel Interrupt mode or to return the
copier to the mode before it entered Interrupt mode. See
p. 3-27.
• Press to enter Energy Saver mode. See p. 3-26.
• Press when making copies using an access code.
See p. 3-28.
• Press to enter Copy mode and use the copier as a copi-
er.
• The [Copy] key indicator lights up in green to indicate
that the copier is in Copy mode.
• Press to enter Scanner mode and use the copier as a
color scanner.
• The [Scan] key indicator lights up in green to indicate
that the copier is in Scanner mode.
• Use to type in the number of copies to be made.
• Use to type in the zoom ratio.
• Use to type in the various settings.
3
3-21