Minolta CF1501 Operator's Manual page 190

9
4
Touch [Gradation Adjust].
The Gradation Adjust screen ap-
pears.
5
Load paper (11 × 17L) into any pa-
per drawer, and then press the
[Start] key to print out the gradation
adjustment test pattern.
? Are more than one of the indicat-
ed paper sizes already loaded
into paper drawers?
§
The paper size for printing the
test pattern will be chosen ac-
cording to the following order: A3L, 11 × 17L, A4C, LetterC
6
Place the printed test pattern on top
of the original glass, and then place
five more sheets of blank paper on
top of the printed test pattern page.
? Is the correct type of paper for
printing the test pattern loaded?
§
Be sure that standard paper (17
to 24 lbs.) is loaded.
Was the test pattern not print-
?
ed?
§ It takes some time for the test pattern to be printed. Please wait a
little while.
7
Close the original cover, and then press the [Start] key to begin adjust-
ing the gradation. When the color gradation has been adjusted, the
Administrator Mode screen appears.
8
Repeat steps 5 through 8 three times.
9
In the Administrator Mode screen, touch [Exit].
10
In the Utility screen, touch [Exit].
9-14
Administrator Mode Operations
CF1501/CF2001