To Set The "Energy Save Mode" Parameter - Minolta CF1501 Operator's Manual

8

To set the "Energy Save Mode" parameter

This parameter can be used to specify the length of time (between 1 and
240 minutes) after the last operation until the copier automatically enters
Energy Saver mode. The default setting is "15 min."
1
In the User's Choice screen, touch
[Energy Save Mode].
2
Using the keypad, enter the desired
number of minutes, and then touch
[Enter].
Do you wish to change the num-
?
ber of minutes entered?
§
Press the [C] (clear) key to
erase the entered number, and
then use the keypad to enter the
correct number of minutes.
3
In the User's Choice screen, touch [Exit].
8-16
Utility Mode Operations
CF1501/CF2001