Minolta CF1501 Operator's Manual page 200

9
When the necessary adjustments are finished, touch [Enter].
4
Using the black grids as references, check for shifts in cyan, magenta
and yellow.
5
In the Expert User's Mode screen,
touch [Color Shift Correction] for the
color that you wish to adjust.
Touch [X], [Y] or [θ] for the adjustment
that you wish to make, and then touch
and
adjustment value.
Continue printing the test pattern and
making adjustments until there no
longer is a color shift. When the
necessary adjustments are finished, touch [Enter].
The example below shows the adjustment for cyan; however, the
other colors should be adjusted in the same way.
H
If the lines are shifted in the X-
direction:
Touch [X], and then align on the
black grid.
9-24
to specify the desired
Administrator Mode Operations
CF1501/CF2001