Advanced Operations
7.4
Hole Punching ("Hole-Punch" Setting)
If an optional finisher (FN-107) and a printer controller are installed, holes
for filing the pages in binders can be punched in printouts sent from a com-
puter.
Types of hole punching
The number of holes punched (either two or three) is automatically select-
ed according to the paper size and the paper feed method.
G
Number of holes punched: 2
Possible paper sizes: LetterL, Le-
galL
Possible paper types: Standard
paper (17 to 24 lbs.)
G
Number of holes punched: 3
Possible paper sizes: LetterC,
11 × 17L
Possible paper types: Standard
paper (17 to 24 lbs.)
Punched hole position:
The position of the punched hole differs according to the printed image
and paper orientation.
G
Possible paper sizes: LetterL, LetterC, LegalL, 11 × 17L
CF1501/CF2001
11 × 17L
LegalL
LetterC
7
LetterL
7-15