To Set The "Mail Bin Assignment" Parameter - Minolta CF1501 Operator's Manual

8

To set the "Mail Bin Assignment" parameter

This parameter allows you to set whether or not mailbins are allocated to
receive printouts from computers when the 10-mailbin sorter (JS-1002)
and the printer controller are installed on the copier. Bins 2 through 10 of
the 10-mailbin sorter can be used to receive printouts. The default setting
is "OFF".
1
In the User's Choice screen, touch
[Mail Bin Assignment].
2
Using the keypad, enter the number
for the bins, until bin 10, that will be
used as mailbins, and then touch
[Enter]. (The screen at the right
shows that bins 5 through 10 have
been specified as mailbins.)
? Do you wish to change the bin
number entered?
§
Press the [C] (clear) key to
erase the entered number, and then use the keypad to enter the
correct bin number.
? When setting the bins to be used as mailbins, how many bins can
be selected?
§
Bins specified as mailbins cannot be used for sorting when making
copies. For the example mentioned above, bins 1 through 4 can be
used for sorting while making copies.
8-14
Utility Mode Operations
CF1501/CF2001