To Register Access Codes - Minolta CF1501 Operator's Manual

Administrator Mode Operations

To register access codes

1
In the Copy Track screen, touch
[ON], and then touch [Access # In-
put].
The Access # Input screen appears.
2
Touch [Account #], and then touch
and
account number.
H Registering a new access code
with an account number already
registered with an access code
changes the access code to the
new one.
H
Although account numbers 1
through 99 are already regis-
tered as a default, they can be changed. For more details, refer to
"To change the account numbers registered" on page 9-4.
H To specify a new account number, erase a previously registered
account number.
3
Using the keypad, enter the four-
digit access code that you wish to
register. To register other access
codes, repeat steps 2 and 3 until the
desired access codes are regis-
tered.
? Do you wish to change the ac-
cess code of an account num-
ber?
§
Press the [C] (clear) key to erase the entered access code.
Has registration of the entered access code been cancelled?
?
§
If the entered access code is the same as one that has already
been registered, registration is cancelled. Try again using a differ-
ent access code.
CF1501/CF2001
to select the desired
9
9-3