9
H
Check that the left margin of the
printed test pattern is 3.0 mm.
H
If the left margin is not as
specified, touch
adjust it, and then touch [Enter].
Setting a higher positive number
makes the margin wider; setting a
higher negative number makes
the margin narrower.
H
Repeat step 3 until the left margin
meets its specification.
What is the standard setting?
?
§
Before adjusting the third or fourth
paper drawer, enter the same ad-
justment value for the first or second paper drawer and check the
test pattern.
4
In the Expert User's Mode screen, touch [Exit].
5
In the Administrator Mode screen, touch [Exit].
6
In the Utility screen, touch [Exit].
9-30
Administrator Mode Operations
and
to
b
b: 3.0 mm ± 1.0 mm
CF1501/CF2001