Other Messages - Minolta CF1501 Operator's Manual

10
10.9

Other Messages

Message
Malfunction detected.
Call your Technical Rep. and
provide code:
Please input your 4-digit Ac-
cess# and press the Access
key.
Replenish paper.
Please add Toner.
Open the Toner Supply Door
and follow the Operator's
Manual.
Please add XXXX Toner.
Please install the correct Im-
aging
Unit correctly, and close all
doors.
Please insert the Image
Transfer
Belt Unit and close all doors.
Please insert Waste Toner
Bottle
and close all doors.
Please insert the Fusing Unit
and
Fusing Web Unit and Oil
Coating Unit
and close all doors.
➜
Close Section properly.
Replace Staple Cartridge X.
Misfeed detected.
Remove misfeed at O.
The Exit Tray has reached its
capacity. Please remove all
pages from -> section tray.
10-44
Cause
The copier malfunctioned
and is unable to make cop-
ies.
Access codes have been
specified. Copies cannot be
made unless a specified ac-
cess code is entered.
The indicated drawer has ran
out of paper.
Since the toner for the indi-
cated color has run out, the
copier is unable to make cop-
ies.
The toner for the indicated
color is about to run out.
The indicated imaging unit is
not installed correctly.
The image transfer belt unit
is not installed correctly.
The waste toner bottle is not
installed correctly.
The fusing unit, fusing web
unit, and oil-coating unit are
not installed correctly.
Since a copier door or cover
is open or an option is not in-
stalled correctly, the copier is
unable to make copies.
The staples have run out.
Since a paper misfeed oc-
curred, the copier is unable
to make copies.
Since the maximum amount
of copies for the indicated fin-
isher tray has been exceed-
ed, the copier is unable to
make copies.
Touch Panel Messages
Remedy
Inform your technical repre-
sentative of the code dis-
played on the touch panel.
Enter your access code.
p. 3-28
Load paper into the indicated
drawer. p. 10-1
Refill the toner. p. 10-6
Refill the toner. p. 10-6
Correctly install the imaging
unit. Otherwise, contact your
technical representative.
Contact your technical repre-
sentative.
Correctly install the waste
toner bottle. Otherwise, con-
tact your technical represen-
tative.
Correctly install the fusing
unit, fusing web unit, and oil-
coating unit. Otherwise, con-
tact your technical represen-
tative.
Make sure that all doors and
covers are closed and that all
options are installed correct-
ly.
Replace the staple cartridge.
p. 10-11
Clear the paper misfeed.
p. 10-16
Remove all copies from the
indicated tray.
CF1501/CF2001