Table of Contents
Advertisement
5. Slide the existing drive out of the drive bay. Remove the drive from the drive
tray by pulling on the handle; then, slide the drive out of the drive tray.
6. Touch the static-protective package containing the new drive to any unpainted
metal surface on the computer; then, remove the drive from the package and
place it on a static-protective surface.
7. Set any jumpers or switches on the new drive according to the documentation
that comes with the drive.
Drive-cage
retention latch
Drive-cage
handle
Drive-tray
handle
Chapter 4. Customer replacement units
51
Advertisement
Table of Contents
Troubleshooting
