7. Gently pull up on the SCSI card until it disengages from the plastic standoffs. If
8. Carefully pull the card toward the front of the computer to remove it from the
9. Lift the card out of the computer.
To replace the SCSI daughter card, reverse the previous steps.
38
IntelliStation M Pro Types 6225 and 6228: Hardware Maintenance Manual and Troubleshooting Guide
the standoffs come away from the system board with the SCSI card, gently pull
them out of the SCSI card and push them back into their apertures on the
system board.
Note: You can also gently pinch the top of each standoff using needle-nose
pliers and then pull the SCSI card away.
system board.
Plastic
standoff