IBM IntelliStation M Pro 6225 Hardware Maintenance Manual And Troubleshooting Manual page 65

7. Touch the static-protective package containing the DIMM to any unpainted
metal surface on the computer. Then, remove the new DIMM from the
package.
8. Gently open the retaining clip on each end of the DIMM slot. Turn the DIMM
so that the pins align correctly with the connector.
9. Insert the DIMM into the connector. Firmly press the DIMM straight down into
the connector by applying pressure on both ends of the DIMM simultaneously.
The retaining clips snap into the locked position when the DIMM is firmly
seated in the connector. If there is a gap between the DIMM and the retaining
clips, the DIMM has not been correctly installed. Open the retaining clips,
remove the DIMM; then, reinsert it.
10. If you have other options to install or remove, do so now; otherwise rotate the
cage back into the computer.
11. Replace the side cover (see "Replacing the side cover" on page 33).
12. Reconnect the external cables and power cords. Turn on the attached devices,
and turn on the computer.
DIMM
connector 4
DIMM
connector 3
DIMM
connector 2
DIMM
connector 1
Chapter 4. Customer replacement units
55