Clearing Hardware Option Conflicts And Saving Option Rom Space - IBM IntelliStation M Pro 6225 Hardware Maintenance Manual And Troubleshooting Manual

10. Turn on the computer and the monitor.
11. After the update is completed, remove the diskette or CD from the diskette
12. Turn off the computer and monitor.
13. Disconnect all power cords; then, remove the computer cover.
14. Return the boot block recovery jumper to pins 1 and 2.
15. Replace the computer cover; then, reconnect all external cables and power
16. Turn on the computer to restart the operating system.

Clearing hardware option conflicts and saving option ROM space

This section provides information about clearing hardware option conflicts and
saving option ROM space on your computer. Do not disable this jumper if you plan
to install FireWire devices on your computer.
Complete the following steps to set the IEEE 1394 (FireWire) enable/disable jumper
and clear hardware option conflicts or to save option ROM space:
1. Review Appendix B, "Safety information," on page 115 and "Handling
2. Turn off the computer and all attached devices.
3. Disconnect the power cord.
4. Remove the side cover.
24
IntelliStation M Pro Types 6225 and 6228: Hardware Maintenance Manual and Troubleshooting Guide
drive or CD-ROM drive.
cords, and turn on the peripheral devices.
static-sensitive devices" on page 29