Installing A Drive In Bay 2, 3, Or 4 - IBM IntelliStation M Pro 6225 Hardware Maintenance Manual And Troubleshooting Manual

Installing a drive in bay 2, 3, or 4

Complete the following steps to install a drive in bay 2, 3, or 4:
48
IntelliStation M Pro Types 6225 and 6228: Hardware Maintenance Manual and Troubleshooting Guide
1. Read Appendix B, "Safety information," on page 115, the guidelines in
"Handling static-sensitive devices" on page 29 and the documentation that
comes with your drive.
2. Turn off the computer and all attached devices (see "Turning off the computer"
on page 6); then, disconnect all external cables and power cords.
3. Remove the side cover (see "Removing the side cover" on page 32).
4. Remove the bezel (see "Removing and Installing the Bezel" on page 34).
5. Use a screwdriver to pry the filler panel and EMC shield away from the
computer.
EMC shield
Filler panel
Drive retainer
clip