Turning Off The Computer - IBM IntelliStation M Pro 6225 Hardware Maintenance Manual And Troubleshooting Manual

The computer can also be turned on in any of the following ways:
v If a power failure occurs while the computer is turned on, the computer will
v When you connect your computer to power for the first time, the Wake on LAN

Turning off the computer

When you turn off the computer and leave it connected to ac power, the computer
can respond to remote requests to turn on the computer. To remove all power from
the computer, you must disconnect it from the power source.
Some operating systems require an orderly shutdown before you turn off the
computer. See the operating-system documentation for information about shutting
down the operating system.
The computer can be turned off in any of the following ways:
v You can turn off your computer from the operating system. If this feature is
v You can press the power-control button on the front of the computer to start an
v You can press and hold the power-control button for more than 4 seconds to
6
IntelliStation M Pro Types 6225 and 6228: Hardware Maintenance Manual and Troubleshooting Guide
restart automatically when power is restored.
feature can turn on the computer. If your computer was previously turned on, it
must be properly turned off for the Wake on LAN feature to turn on the computer.
Statement 5
CAUTION:
The power control button on the device and the power switch on the power supply do
not turn off the electrical current supplied to the device. The device also might have
more than one power cord. To remove all electrical current from the device, ensure
that all power cords are disconnected from the power source.
1 2
supported by your operating system, it will turn off the computer after performing
an orderly shutdown of the operating system.
– To turn off the computer from the Microsoft
click Start > Turn Off Computer; then, click Turn Off.
– To turn off the computer from the Red Hat Linux operating system, click Red
Hat Linux Main Menu Button > Logout > Shutdown; then, click Yes.
orderly shutdown of the operating system and turn off the computer, if your
operating system supports this feature.
Note: After turning off the computer, wait at least 5 seconds before you press
the power-control button to turn on the computer again.
cause an immediate shutdown of the computer. You can use this feature to turn
off the computer if the operating system stops functioning.
® ®
Windows XP operating system,
®