Table of Contents
Advertisement
Replacing the side cover
If you removed the bezel, reinstall it before you replace the side cover. See
"Removing and Installing the Bezel" on page 34.
Complete the following steps to replace the side cover:
1. Make sure that all cables, adapters, and other components are installed and
2. Install the side cover by placing it into position on the computer. Be certain that
3. Reconnect the external cables and power cords to the computer; then, connect
4. Turn on the attached devices; then, turn on the computer.
seated correctly and that you have removed all work tools or parts from inside
the computer.
the lip on the bottom of the cover rests on the ledge on the bottom of the
chassis. Slide the side cover forward to lock the side cover.
the power cords to electrical outlets.
Chapter 4. Customer replacement units
33
Advertisement
Table of Contents
Troubleshooting
