IBM IntelliStation M Pro 6225 Hardware Maintenance Manual And Troubleshooting Manual page 52

10. Connect required cables to the adapter. Route cables so that they do not block
11. If you have another adapter to install, repeat steps 4 through 10.
12. If you have installed a full-length adapter, press down on the top tab of the
13. If you have other options to install, do so now; otherwise, replace the side
42
IntelliStation M Pro Types 6225 and 6228: Hardware Maintenance Manual and Troubleshooting Guide
9. Rotate the rear adapter-retention bracket to the closed (locked) position.
the flow of air from the fans. If you are installing an optional SCSI adapter, see
"Cabling an optional SCSI adapter" on page 43 for additional information.
front adapter-retention bracket to lock it in place (the tab is inside the fan
compartment that is next to the front adapter-retention bracket).
Note: If any adapter in your computer is large or has heavy cables attached to
it, you can secure the adapter with a screw. Insert one backup
expansion-slot screw through the top of each adapter bracket into the
screw hole and secure the adapter before proceeding to the next step.
cover (see"Replacing the side cover" on page 33), reconnect the external
cables and power cords, and turn on the computer.