Replacing The Side Cover - IBM IntelliStation Z Pro 6223 Hardware Maintenance Manual And Troubleshooting Manual

Replacing the side cover

Complete the following steps to replace the side cover.
1. Before installing the cover, check that all cables, adapters, and other
2. Install the side cover by placing it into position on the computer. Make sure that
3. Reconnect the external cables and power cords to the computer.
4. Turn on the attached devices; then, turn on the computer.
components are installed and seated correctly and that you have cleared all
work tools from inside the computer.
the lip on the bottom of the cover rests inside the ledge on the bottom of the
chassis before rotating the cover toward the computer. Press down and forward
on the cover until it locks.
Chapter 4. Installing options
51