Cd-Rom Emergency-Exit Option <1; Cd-Rom Emergency-Exit Option <2 - IBM Aptiva Series Hardware Maintenance
Machine type 2136 and ibm monitors type 2119 and 2120
Hide thumbs
Also See for Aptiva Series:
- Handbook (164 pages) ,
- Quick start manual (2 pages) ,
- Quick start manual (2 pages)
Table of Contents
Advertisement
CD-ROM Emergency-exit Option <1>
Figure 5- 11 CD-ROM Front Panel with Emergency Hole View
If for any reason the tray does not eject automatically, insert and press an eject-
bar inside the emergency eject hole to manually eject the tray. A straightened
paper clip with a diameter of 1.2 mm (typical) can be used as an eject-bar.
Note:
Make sure to turn off the power before manual disc eject operation.
CD-ROM Emergency-exit Option <2>
Locate the bottom edge of the disc tray. Gently pry the disk tray open with a
screwdriver.
When the disc tray opens, simply remove the disc from the CD-
ROM drive.
5-14
Advertisement
Table of Contents
