Feature Guide References
1.18.4 Display Information
Trunk Group Number
Specifies the CO line group number to which the CO line belongs.
Default
1
Value Range
1–64
Programming References
None
Feature Guide References
2.2.2 Group
4.15.2 DIL Table & Port Setting [9-2]
Direct In Line (DIL) can be selected for each CO line as the method of distributing incoming CO line calls to
certain destinations. For each CO line to which the DIL distribution is set, different destinations can be
programmed depending on the time mode (day/lunch/break/night). If desired, Calling Line Identification
(CLI) distribution can be used in conjunction with the DIL distribution.
DIL
For each CO line to which the DIL distribution is set, different DIL destinations can be programmed
depending on the time mode (day/lunch/break/night). Generally, DIL distribution is used for CO line calls
from analog CO lines. Tenant number and VPS trunk (CO line) group number can also be programmed for
each CO line.
Slot
Indicates the slot position of each CO line card (reference only).
Default
Current slot number
Value Range
Slot number
Feature Guide References
None
4.15 CO & Incoming Call [9]
Feature Guide
547