3.1 Introduction
3.1.3
Entering Characters
The characters that can be used when performing system programming differ depending on whether
programming is being done using a PT or a PC.
PT Programming
The following characters can be used when storing a name, message, or other text entry data using a PT.
The tables below show you the characters available on each button.
[Example of Character Entry]
To enter "Ann":
A
2
Notes
•
To move the cursor left or right, press
•
To delete a character, move the cursor left or right to highlight it, then press CLEAR.
•
Press SELECT to cycle through the characters located on a dialing button in reverse order.
200
Feature Guide
n
(5 times)
6
OR
n
6
(5 times)
or
, respectively.